top of page
  • Joel Removals

How to Move a Pool Table


How to Move a Pool Table
How to Move a Pool Table

Whether it's a family heritage or a recent addition to your home entertainment, ensuring the safe transportation of a pool table requires planning and precision. In this comprehensive guide, we'll walk you through the step-by-step process of moving a pool table during a house relocation, ensuring that your prized possession arrives at its new home unscathed.



Step 1: Gather Your Tools and Materials.


Before you begin the moving process, gather all the necessary tools and materials. This includes:

  • Moving blankets or thick furniture pads

  • Bubble wrap or packing paper

  • Stretch wrap or plastic cling film

  • Moving straps or heavy-duty ropes

  • Screwdrivers and power tools

  • Tape measure

  • Furniture dollies or sliders

If you don't have any of these items or you would rather an expert handle this for you Contact us at Joel Removals, we are happy helpers!


Step 2 : Disassemble the Pool Table



Disassembling a pool table is a crucial step in ensuring a smooth and damage-free relocation process. This task involves breaking down the table into its individual components, making it easier to transport and reassemble later. Useful steps are below on How to Move a Pool Table.



Removing the Pockets:

Start by carefully removing the pockets from the pool table. Pockets are typically attached with screws, and using a screwdriver is usually sufficient for this step.


Keep track of all screws and small parts associated with the pockets. Consider placing them in labelled bags or containers to prevent any confusion during the reassembly process.


Taking Apart the Rails:


The next component to disassemble is the rails. These are the long wooden sections along the sides of the pool table that hold the cushions and guide the balls into the pockets.


Use a screwdriver to remove the screws connecting the rails to the table frame. It's important to proceed with caution, ensuring that the rails are disconnected without causing any damage to the wood or the cushions.


Removing the Felt:


The felt, covering the playing surface of the pool table, needs to be carefully removed. Start by detaching it from the edges and carefully pulling it away from the slate.


Take note of any staples or adhesive used to secure the felt, as this information will be valuable during the reassembly process. If necessary, use a staple remover or pliers to gently take out any staples.


Taking Apart the Slate:


The slate is the heavy, flat surface underneath the felt that provides the smooth playing surface of the pool table. It is often composed of multiple pieces.


Use power tools, such as a cordless drill with the appropriate bits, to remove the screws securing the slate to the table frame. Take care to support the slate as you work to prevent it from accidentally dropping or cracking.


Documenting the Disassembly:


Throughout the disassembly process, consider taking photographs or making notes to document the placement and orientation of each component. This will serve as a helpful reference on How to move a pool table .During the reassembly, ensure that everything is reconstructed correctly.


Step 3 : Protect the Components of the Pool table


Moving Blankets or Bubble Wrap:

Once the pool table is disassembled, lay out moving blankets or use bubble wrap to cover each component individually.

The moving blankets provide a thick layer of cushioning that helps absorb shocks and vibrations during transit, preventing scratches and dents.


Wrap Each Component Securely:

Carefully wrap each component, such as the rails, pockets, and slate, ensuring that the entire surface is covered. Pay special attention to corners and edges, as these areas are more susceptible to damage.


For fragile components like the slate, consider adding extra layers of bubble wrap or using specialized packing materials to provide enhanced protection.


Stretch Wrap or Plastic Cling Film:

After wrapping each component in moving blankets or bubble wrap, use stretch wrap or plastic cling film to secure the protective covering in place.

The stretch wrap creates a tight and secure seal around the components, preventing the moving blankets or bubble wrap from shifting or coming loose during transit.


Securing Small Parts:

For small parts like screws, bolts, and pockets, place them in labelled bags or containers. These can be wrapped with the respective component or kept together in a designated box.

By keeping small parts organized and attached to their corresponding components, you'll avoid confusion during the reassembly process.


Labelling and Documentation:

Consider labelling each wrapped component with its corresponding part or section of the pool table. This can be especially helpful when you're unpacking and reassembling the table at your new location.


Document the wrapping process with photographs or notes to further assist you during the unpacking and reassembly stages.


By taking the time to protect each component with moving blankets, bubble wrap, and stretch wrap, you create a secure and cushioned barrier that guards against potential damage during the moving process.


Step 4 : Prepare the Slate



Preparing the slate for transportation is a crucial step in the overall process of moving a pool table. The slate, being the heaviest and most delicate part of the pool table, requires special attention and care to ensure it arrives at its destination without any damage.


Here's a detailed explanation of how to prepare the slate:


Lift Each Slate Piece Carefully:

Slate is typically divided into multiple pieces, each weighing a significant amount. Exercise caution and lift each slate piece with care to avoid straining yourself or causing damage to the slate.

Ensure you have enough people to assist with lifting, and use proper lifting techniques to minimize the risk of injury.


Wrap in Moving Blankets or Bubble Wrap:

Once lifted, immediately wrap each slate piece in moving blankets or bubble wrap. This protective layer serves as a buffer against scratches, chips, and other potential damages during transportation.

Be generous with the amount of moving blankets or bubble wrap used, ensuring that the slate is well-padded and securely covered on all sides.


Secure with Moving Straps or Heavy-Duty Ropes:

After wrapping each slate piece, use moving straps or heavy-duty ropes to secure them together. This step is essential to prevent individual slate pieces from shifting or separating during transit.


Place the straps or ropes snugly around the wrapped slate, creating a bundle that holds the pieces together. Make sure the straps are tightened enough to prevent any movement but not so tight as to risk damaging the slate.


Protect Edges and Corners:

Pay special attention to the edges and corners of the slate, as these areas are particularly vulnerable to damage. Consider adding extra padding or reinforcement in these areas to enhance protection.


If there are any gaps between slate pieces, fill them with additional padding material to prevent them from rubbing against each other during transportation.


Label and Document:

Clearly label the bundled slate with a marker to indicate its fragility and which side should face up during transportation. This simple step can prevent mishandling and ensure that the slate is placed correctly when reassembling the pool table.


Document the wrapping and securing process with photographs or notes to guide you during the unpacking and reassembly stages.



Step 5: Move the Pool Table Frame


With the components protected and secured, it's time to move the pool table frame. Depending on its size and weight, you may need assistance or specialized equipment such as furniture dollies or sliders. Carefully lift and manoeuver the frame out of its current location, taking care to avoid scraping or bumping against walls and doorways.



Step 6: Transporting the Components


Load the disassembled components of the pool table into a suitable moving vehicle. Arrange the components in a secure and organized manner to minimize shifting during transit. Use padding and tie-downs to secure the components in place and prevent any damage.


Step 7: Reassemble the Pool Table


Once you arrive at your new home, it's time to reassemble the pool table. Refer to your notes or photographs taken during the disassembly process to ensure each component is correctly positioned and assembled. Take your time to ensure everything fits together snugly and securely.


Step 8: Level the Pool Table


After reassembling the pool table, use a level to ensure that the playing surface is perfectly flat and level. Adjust the legs as needed to achieve the desired levelness, taking care to check each corner and side of the table.


Step 9: Install the Felt and Rails


Once the pool table is level, carefully install the felt and rails. Take your time to ensure the felt is smooth and free of wrinkles, and that the rails are securely attached to the frame.



Step 10: Enjoy Your Newly Moved Pool Table


With the pool table successfully moved and reassembled, it's time to sit back, relax, and enjoy a game with friends and family. Thankyou for reading our useful tips on How to Move a Pool Table.


We can help you if you need the Man power and expertise on How to Move a Pool Table . Contact us today for a quick chat about your move.



Recent Posts

See All

We provide Packing services, house removal services, office removal services, junk removals, etc.

bottom of page